|Mesh/In.||Wire Dia.||Swatch||Panel||2-19 Panels||20-49 Panels||50+ Panels||Part Number/Details|
This specialty group of screenings is used in a wide range of decorative, architectural, and commercial applications.
Intercrimp wire meshes require care and skill to cut to size. The mesh should be laid with two edges against a square corner to keep the mesh openings symmetrical and the wires should be carefully marked with a marker. Cut wire thickness up to .062 inches with heavy-duty wire cutters or tin snips. Meshes woven from wires thicker than .062 inches will require a small bolt cutter, which is available at hardware stores. Care should be taken to make sure the wires do not skew while being marked and cut. * _the small corner wires in a piece of Intercrimp wire mesh tend to fall out when the panel is cut and this should be taken into consideration when framing this material_.
The available colors are:
We cannot guarantee a uniformed, brilliant polished finish when you receive the material because it is affected by the atmosphere.
TWP Inc. will provide samples for your testing and inspection. The cost is $10 per sample ordered The sample size is 3 inches by 3 inches.