TWP Inc.

Your One Source For Mesh Materials And Cutting Services: 510.548.4434 / 800.227.1570; Berkeley, California USA

Home

ABOUT SSL CERTIFICATES

Home

4 Mesh Galv Welded 2 inches X 100 feet

VIEW LARGER

< Coarser | Finer >

TWP Part #: G4M2

Select the unit of measure below.
Enter the quantity in the box.
Click Add to Cart.

Swatch

Full Roll

More....

This is hot dipped galvanized mesh cut into convenient widths from 2 to 8 inches. These spools are used in the eves and foundation vents of buildings. Some housing codes in the southern USA require 8 mesh to exclude killer bees. but normally a 2 mesh(1/2 inch hole size) or 4 mesh(1/4 inch hole size) is used to stop small rodents, bats, birds and snakes. We can quickly and inexpensively cut these narrow spools into flat neatly stacked rectangles for your production needs. These meshes are also called bird block

Pricing
Swatch This is a small square for your inspection and testing Swatch sizes: 8 mesh and coarser: 6 inch x 6 inch 10 mesh and finer: 3 inch x 3 inch Stainless steel 635 x 635 mesh: 1 inch x 1 inch	1 - 12 SpoolsThe prices are for each spool of mesh up to 12 spools.	13 - 47 SpoolsThe prices are for each spool of mesh from 13 to 47 spools.	48 - 95 SpoolsThe prices are for each spool of mesh from 48 to 95 spools.	96 - 199 SpoolsThe prices are for each spool of mesh from 96 to 199 spools.
$8.00	$12.15	$10.33	$9.72	$8.50

Specifications
Part NumberThe Part Number for the Product	Mesh / InchNumber of openings per linear inch measured from the center of one wire to a point one inch distant.	Wire Dia. InchesThe thickness of the wire in inches.	Opening InchesThe distance between two adjaent parallel wires in inches	% OpenThe proportion of open space in section of screen expressed as a percentage.	Roll Width InchesRoll Width in inches	Weight / SFTWeight in pounds for one sqsuare foot (12 inches x 12 inches) piece of mesh.
G4M2	4	0.0250	0.225	80	2

Metric Specifications
Part NumberThe Part Number for the Product	Mesh / 2.54 cmNumber of openings per linear 2.54 cm measured from the center of one wire to a point one inch distant.	Wire Dia. mmThe thickness of the wire in millimeters.	Opening mmThe distance between two adjaent parallel wires in millimeters.	Opening micronsThe distance between two adjacent parallel wires in microns. One micron is equivalent to 0.00003937 of one inch.	% OpenThe proportion of open space in section of screen expressed as a percentage.	Roll Width cmRoll Width in centimeters.
G4M2	4	0.6350	5.72	5715	80	2

Minimum Order is one roll or $75 per item.(whichever is more)
Prices are in U.S. dollars.
Swatches are $8.00 each

Sample Policy

FOB Point is Berkeley, California. U.S.A.

People call galvanized hardware cloth by many different names, including, hot dipped screen wire, galvanized screen wire, or galvanized mesh. Sometimes its’ use is a name, like soffit screen or gopher screen, raccoon mesh, etc. It is an economical choice for industrial, agricultural and some residential uses. All hardware cloth is first woven or welded from steel wire and then dipped in a bath of molten zinc. This heavy zinc coating is also called galvanizing, serves to protect the mesh from corrosion, and stabilizes the crossover points of the wires, which makes them non-raveling. This family of meshes is sturdy, economical and heavy; not pretty and pricey.

Welded Hardware Cloth

The 1-inch mesh (1 mesh), the 2 mesh, and 4 mesh .025 inch are electrically welded before its galvanizing bath.

Woven Hardware Cloth

Minnow Traps are made from our Heavy Three Mesh (3x3 mesh) Galvanized after woven mesh. The heavy wire makes it heavy enough to sink the wooden framed traps without additional weights. Some of our customers allow the mesh to "weather" outdoors for a season to reduce the shiny appearance that may scare the minnows.

IF YOU NEED A MESH WITH ABOUT ONE INCH HOLES, ORDER “ONE MESH”.

1 mesh is another name for 1-inch mesh.

The wires are one-inch apart, center-to-center

IF YOU NEED A MESH WITH ABOUT HALF INCH HOLES, ORDER TWO MESH

2 mesh is another name for 1/2 inch mesh.

The wires are one half inch inches apart, center-to-center.

IF YOU NEED A MESH WITH ABOUT ONE-THIRD INCH HOLES, ORDER “THREE MESH”

3 mesh has wires that are 1/3 of an inch apart center to center.

IF YOU NEED A MESH WITH ABOUT ONE-QUARTER INCH HOLES, ORDER “FOUR MESH”

* 4 mesh is another name for 1/4 inch mesh.

* The wires are one-quarter inch apart, center-to-center.

IF YOU NEED A MESH WITH ABOUT ONE-FIFTH INCH HOLES, ORDER “FIVE MESH”

5 mesh has wires that are 1/5 of an inch apart center to center

IF YOU NEED A MESH WITH ABOUT ONE-EIGHTH INCH HOLES, ORDER, “EIGHT MESH”

8 mesh is another name for 1/8 inch mesh.

The wires are 1/8 inch apart, center-to-center.

We sell Galvanized hardware cloth in 100-foot rolls. The standard widths are 24, 36, and 48 inches wide. We also produce and stock standard narrow widths: 2, 2.5, 3, 4, 6, 8, and 12 inches wide by 100 feet long. We can also produce continuous 300-foot long roll lengths.

Custom widths up to 72 inches wide are available for orders of 50 rolls or more.

Closeouts, overstocks, and discount galvanized screen wire meshes may be available.

Our general range of hardware cloth runs from one-eighth, one –quarter inch, one-third inch, and one-half inch wire spacing. We sell these galvanized-after-welded steel meshes in cut pieces, discs, and narrow spools. 031605

TWP Inc.

Help Center

4 Mesh Galv Welded 2 inches X 100 feet

TWP Part #: G4M2

More....