<link rel="stylesheet" href="/content/images/contentForum.css" type="text/css"/>
Your One Source For Mesh Materials And Cutting Services
510.548.4434 / 800.227.1570
Berkeley, California USA
Home

My Shopping Cart

Home > High Transparency

24 Mesh Black Epoxy Coat Stainless 40 Wide

TWP Part #: 024X024SE0060W40_BLK

  • Black Stainless Steel
  • Better visibility than standard insect screen
  • Fine mesh weave with a fine wire diameter 

  1. Select the unit of measure below.
  2. Enter the quantity in the box.
  3. Click Add to Cart.
12 square feet is the minimum order

More information about High Transparency Mesh

OVERVIEW

These meshes are produced using highly sophisticated wire drawing and weaving technologies. Stainless steel T304 rod is drawn to an extremely smooth close tolerance wire many times finer than a single strand of human hair. You can see through these gauzy, delicate stainless steel meshes.

Stainless steel: optically clear, high transparency meshes, listed in this section, are used in the manufacture of shielded windows for viewing instrumentation inside a shielded enclosure. They are also used for covering computer display screens to prevent the emanation of unwanted electrical emissions.

These meshes are produced using highly sophisticated wire drawing and weaving technologies. Stainless steel T304 rod is drawn to an extremely smooth close tolerance wire many times finer than a single strand of human hair. A computer-controlled loom weaves this into the world's most delicate metal fabric.

The result is a highly transparent, uniform mesh. It is used in shielded windows and cathode ray tubes (CRT's). Our mesh qualifies as "optical grade". It requires great care in handling. This material is woven to ISO 9044.

High Transparency Mesh - Uses

These "optical grade" precision stainless steel meshes are used for manufacturing shielded CRT screens and transparent radio frequency (RFI) shielded windows

High Transparency Mesh - Cutting and Handling

This is an extremely delicate material. The material is extremely flimsy and can be wrinkled or skewed even with careful handling. Extreme care in combination with taping the outer edges of the piece of mesh to a backing paper may assist in handling this material.

High Transparency Mesh - Samples

TWP Inc. will provide samples for your testing and inspection. The cost is $8 per sample ordered (plus UPS Charges about $3.00 total for up to 10 samples by UPS ground - USA). For the quickest service, please order your samples on-line. All high transparency samples are 3" x 3" .

  Pricing
1 - 24 SFTThe prices are for each square foot of a cut piece up to 25 square feet. Note: there is a $75 minimum order. 25 - 99 SFTThe prices are for each square foot of a cut piece from 25 to 99 square feet. Note: there is a $75 minimum order. 100 or More SFTThe prices are for each square foot of a cut piece 100 square feet and up. Note: you may get a better price from the full roll column. Swatch This is a small square for your inspection and testing
Swatch sizes:
  • 8 mesh and coarser: 6 inch x 6 inch
  • 10 mesh and finer: 3 inch x 3 inch
  • Stainless steel 635 x 635 mesh: 1 inch x 1 inch
 Full Roll100 feet long by the roll width
$6.25 $4.75 $4.19 $8.00 $565.00
  Specifications
Part NumberThe Part Number for the Product Mesh / InchNumber of openings per linear inch measured from the center of one wire to a point one inch distant. Wire Dia. InchesThe thickness of the wire in inches. Opening InchesThe distance between two adjaent parallel wires in inches % OpenThe proportion of open space in section of screen expressed as a percentage. Roll Width InchesRoll Width in inches Weight / SFTWeight in pounds for one sqsuare foot (12 inches x 12 inches) piece of mesh.
024X024SE0060W40_BLK 24 0.0060 0.0357 73 40 0.06
  Metric Specifications
Part NumberThe Part Number for the Product Mesh / 2.54 cmNumber of openings per linear 2.54 cm measured from the center of one wire to a point one inch distant. Wire Dia. mmThe thickness of the wire in millimeters. Opening mmThe distance between two adjaent parallel wires in millimeters. Opening micronsThe distance between two adjacent parallel wires in microns. One micron is equivalent to 0.00003937 of one inch. % OpenThe proportion of open space in section of screen expressed as a percentage. Roll Width cmRoll Width in centimeters.
024X024SE0060W40_BLK 24 0.1524 0.91 907 73 40
Minimum Order for Black Epoxy coated Stainless Steel mesh is $75 per item. Note: the quantity of square feet shown in the Minimum Order (SFT) column costs $75. Rolls are either 40 or 48" by 100 feet long.

Sample Policy

Prices are in U.S. dollars per square foot.

You may purchase a 6 inch square swatch on-line for eight dollars plus UPS charges.

FOB Point is Berkeley, California. U.S.A.
Prices are in U.S. dollars per square foot.